3 M 23 Black Self Amalgamating Rubber Splicing Electrical Self Fusing Tape

• Certification: ISO9001
• Color: Black
• Heat Resistance: High Temperature
• Waterproof: Waterproof
• Application: Paper, Plastic, Metal, Rubber, Wood, Leather, Textile, Glass, Ceramic
• Adhesive: Non-Adhesive
• Model NO.: 3 M 23
• Base Material: Ethylene Propylene Rubber
• Type: Insulating Tape
• Transport Package: Cartons Packing
• Specification: 3/4inch * 30ft
• Trademark: 3 M
• Origin: USA
• HS Code: 3919109900
• Production Capacity: 1000000

Product Description

Product Description

3 M 23 Black Self Amalgamating Rubber Splicing Electrical Self Fusing Tape

3 M Rubber Splicing Tape 23 is a highly conformable, self-fusing EPR (Ethylene Propylene Rubber) based, high voltage splicing tape. It is a non-vulcanizing, shelfstable tape with excellent electrical properties. 3 M Tape 23 can be used as an insulation for low-voltage application as well as an insulation for splices up to 69,000 volts.

 

Specificication

Property	Typical Value
Color	Black
Thickness	30 mils (0.76mm)
Tensile Strength	8 lbs/in (1.4KN/m)
Ultimate Elongation	1000%
Operating Temperature	90ºC
Emergency Operating Temperature	130° C
Thermal Conductivity	.1208 Btu (hr)(sq ft)
Dielectric Strength	800 V/mil (31,5 Mv/m)
Insulation Resistance	>1 x 106 megohms

Features

Can be used to splice and terminate cables whose emergency overload temperatures can reach 266°F (130°C)

• Based on Ethylene Propylene Rubber (EPR)

• Physical and electrical properties are unaffected by the degree of stretch

• Self-fusing tape

• Excellent electrical properties

• A special polyester liner which will not stick to the tape upon unwind

• Compatible with all solid dielectric cable Insulation:

1. Polyethylene (high and low density)

2. Cross-linked Polyethylene (XLP)

3. Polyvinyl Chloride (PVC)
4. Butyl Rubber

5. Ethylene Propylene Rubber (PVC)

6. Oil-based rubbe

Application

• Primary electrical insulation for splicing cable from 600 volts through 69,000 volts on all solid dielectric cables

• Primary insulation for building stress cones on cables up to 35,000 volts on all solid dielectric cables

• Jacketing on high-voltage splices and terminations

• Moisture sealing electrical connections

• Bus bar insulations

• End sealing high-voltage cables